CHAPTER
47-1
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
47
Configuring Port Security
This chapter describes how to configure the port security feature.
Note For complete syntax and usage information for the commands used in this chapter, refer to the Cisco IOS
Master Command List, Release 12.2SX at this URL:
http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html
This chapter consists of these sections:
• Understanding Port Security, page 47-1
• Default Port Security Configuration, page 47-3
• Port Security Guidelines and Restrictions, page 47-3
• Configuring Port Security, page 47-4
• Displaying Port Security Settings, page 47-13
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
Understanding Port Security
These sections describe port security:
• Port Security with Dynamically Learned and Static MAC Addresses, page 47-2
• Port Security with Sticky MAC Addresses, page 47-3
To Next Page
Loading...
Need help?
General
