CHAPTER
2-1
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
2
Command-Line Interfaces
This chapter describes the command-line interfaces (CLIs) you use to configure the routers supported
by Cisco IOS Release 12.2SX.
Note For complete syntax and usage information for the commands used in this chapter, see these
publications:
• The Cisco IOS Master Command List, Release 12.2SX at this URL:
http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html
• The Release 12.2 publications at this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_installation_and_configuratio
n_guides_list.html
This chapter consists of these sections:
• Accessing the CLI, page 2-2
• Performing Command Line Processing, page 2-3
• Performing History Substitution, page 2-4
• Cisco IOS Command Modes, page 2-4
• Displaying a List of Cisco IOS Commands and Syntax, page 2-5
• Securing the CLI, page 2-6
• ROM-Monitor Command-Line Interface, page 2-7
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
To Next Page
Loading...
Need help?
General
