CHAPTER
51-1
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
51
Configuring NDE
This chapter describes how to configure NetFlow Data Export (NDE).
Note For complete syntax and usage information for the commands used in this chapter, refer to these
publications:
• The Cisco IOS NetFlow Command Reference at this URL:
http://www.cisco.com/en/US/docs/ios/netflow/command/reference/nf_book.html
• The Release 12.2 publications at this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/tsd_products_support_series_home.ht
ml
• NetFlow version 9 is supported—See this document:
Cisco IOS NetFlow Configuration Guide.
This chapter contains the following sections:
• Understanding NDE, page 51-2
• NDE Configuration Guidelines and Restrictions, page 51-10
• Configuring NDE, page 51-10
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html