CHAPTER
55-1
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
55
Configuring Generic Online Diagnostics
This chapter describes how to configure the generic online diagnostics (GOLD) on the Cisco 7600 series
routers.
Note For complete syntax and usage information for the commands used in this chapter, refer to the Cisco IOS
Master Command List, Release 12.2SX, at this URL:
http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html
This chapter consists of these sections:
• Understanding How Online Diagnostics Work, page 55-1
• Configuring Online Diagnostics, page 55-2
• Running Online Diagnostic Tests, page 55-5
• Performing Memory Tests, page 55-10
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
Understanding How Online Diagnostics Work
With online diagnostics, you can test and verify the hardware functionality of the Cisco 7600 series
router while the router is connected to a live network.
The online diagnostics contain packet switching tests that check different hardware components and
verify the data path and control signals. Disruptive online diagnostic tests, such as the built-in self-test
(BIST) and the disruptive loopback test, and nondisruptive online diagnostic tests, such as packet
switching, run during bootup, line card online insertion and removal (OIR), and system reset. The
nondisruptive online diagnostic tests run as part of background health monitoring or at the user’s request
(on-demand).
To Next Page
Loading...
Need help?
General
