4-7
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 4 Configuring a Supervisor Engine 720
Configuring and Monitoring the Switch Fabric Functionality
Displaying Fabric Errors
To display fabric errors of one or all modules, perform this task:
This example shows how to display fabric errors on all modules:
Router# show fabric errors
Module errors:
slot channel crc hbeat sync DDR sync
1 0 0 0 0 0
8 0 0 0 0 0
8 1 0 0 0 0
9 0 0 0 0 0
Fabric errors:
slot channel sync buffer timeout
1 0 0 0 0
8 0 0 0 0
8 1 0 0 0
9 0 0 0 0
Router#
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
Command Purpose
Router# show fabric errors [
slot_number
| all]
Displays fabric errors.
To Next Page
Loading...
