Contents
16
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Configuring RGMP 1
Understanding How RGMP Works 1
Default RGMP Configuration 2
RGMP Configuration Guidelines and Restrictions 2
Enabling RGMP on Layer 3 Interfaces 3
Configuring Network Security 1
Configuring MAC Address-Based Traffic Blocking 2
Configuring TCP Intercept 2
Configuring Unicast Reverse Path Forwarding Check 2
Understanding PFC3 Unicast RPF Check Support 2
Understanding PFC2 Unicast RPF Check Support 3
Unicast RPF Check Guidelines and Restrictions 3
Configuring Unicast RPF Check 3
Understanding Cisco IOS ACL Support 1
Cisco IOS ACL Configuration Guidelines and Restrictions 1
Hardware and Software ACL Support 2
Configuring IPv6 Address Compression 3
Optimized ACL Logging with a PFC3 5
Understanding OAL 5
OAL Guidelines and Restrictions 5
Configuring OAL 6
Guidelines and Restrictions for Using Layer 4 Operators in ACLs 7
Determining Layer 4 Operation Usage 8
Determining Logical Operation Unit Usage 8
Configuring VLAN ACLs 1
Understanding VACLs 1
VACL Overview 2
Bridged Packets 2
Routed Packets 3
Multicast Packets 4
Configuring VACLs 4
VACL Configuration Overview 5
Defining a VLAN Access Map 5
Configuring a Match Clause in a VLAN Access Map Sequence 6
Configuring an Action Clause in a VLAN Access Map Sequence 7