20-36
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 20 Configuring STP and Prestandard IEEE 802.1s MST
Configuring Prestandard IEEE 802.1s MST
These examples show how to display spanning tree VLAN configurations in MST mode:
Router(config)# spanning-tree mst configuration
Router(config-mst)# instance 1 vlan 1-10
Router(config-mst)# name cisco
Router(config-mst)# revision 1
Router(config-mst)# ^Z
Router# show spanning-tree mst configuration
Name [cisco]
Revision 1
Instance Vlans mapped
-------- ---------------------------------------------------------------------
0 11-4094
1 1-10
-------------------------------------------------------------------------------
Step 5
Router# show spanning-tree mst
number
interface
interface
name
[detail]
Displays MST information for a given port and a given
instance.
Step 6
Router# show spanning-tree mst [
x
] [
interface
Y
]
detail
Displays detailed MST information.
Step 7
Router# show spanning-tree vlan
vlan_ID
Displays VLAN information in MST mode.
Command Purpose
To Next Page
Loading...
