24-23
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 24 Configuring PFC3BXL and PFC3B Mode Multiprotocol Label Switching
Any Transport over MPLS
• To view the state of the currently routed VCs, enter the show mpls l2transport vc command:
Router# show mpls l2transport vc
Local intf Local circuit Dest address VC ID Status
------------- -------------------- --------------- ---------- ----------
Vl2 Eth VLAN 2 11.11.11.11 2 UP
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
To Next Page
Loading...
