36-27
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 36 Configuring Denial of Service Protection
DoS Protection Configuration Guidelines and Restrictions
MCAST DIRECT CON Off - - -
ACL BRIDGED IN Off - - -
ACL BRIDGED OUT Off - - -
IP FEATURES Off - - -
ACL VACL LOG On 2000 1 Not sharing
CEF RECEIVE Off - - -
CEF GLEAN Off - - -
MCAST PARTIAL SC On 100000 100 Not sharing
IP RPF FAILURE On 100 10 Group:0 S
TTL FAILURE Off - - -
ICMP UNREAC. NO-ROUTE On 100 10 Group:0 S
ICMP UNREAC. ACL-DROP On 100 10 Group:0 S
ICMP REDIRECT Off - - -
MTU FAILURE Off - - -
MCAST IP OPTION Off - - -
UCAST IP OPTION Off - - -
LAYER_2 PDU Off - - -
LAYER_2 PT Off - - -
IP ERRORS On 100 10 Group:0 S
CAPTURE PKT Off - - -
MCAST IGMP Off - - -
MCAST IPv6 DIRECT CON Off - - -
MCAST IPv6 *G M BRIDG Off - - -
MCAST IPv6 *G BRIDGE Off - - -
MCAST IPv6 SG BRIDGE Off - - -
MCAST IPv6 ROUTE CNTL Off - - -
MCAST IPv6 DFLT DROP Off - - -
MCAST IPv6 SECOND. DR Off - - -
Router#
To display the usage of the hardware rate limiters, use the show mls rate-limit usage command:
Router# show mls rate-limit usage
Rate Limiter Type Packets/s Burst
--------------------- --------- -----
Layer3 Rate Limiters:
RL# 0: Free - - -
RL# 1: Free - - -
RL# 2: Free - - -
RL# 3: Used
MCAST DFLT ADJ 100000 100
RL# 4: Free - - -
RL# 5: Free - - -
RL# 6: Used
IP RPF FAILURE 100 10
ICMP UNREAC. NO-ROUTE 100 10
ICMP UNREAC. ACL-DROP 100 10
IP ERRORS 100 10
RL# 7: Used
ACL VACL LOG 2000 1
RL# 8: Rsvd for capture - - -
Layer2 Rate Limiters:
RL# 9: Reserved
RL#10: Reserved
RL#11: Free - - -
RL#12: Free - - -
Router#
To Next Page
Loading...
Need help?
General
