EasyManua.ls Logo

Cisco 7604

Cisco 7604
1011 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41-49
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 41 Configuring PFC QoS
PFC QoS Default Configuration
1p3q1t Transmit Queues
Standard transmit queue 2
(intermediate priority)
Threshold 1 CoS 2
Tail-drop Disabled; 70%
WRED-drop Enabled; 40% low, 70% high
Threshold 2 CoS 3 and 4
Tail-drop Disabled; 100%
WRED-drop Enabled; 70% low, 100% high
Thresholds 3–8 CoS None
Tail-drop Disabled; 100%
WRED-drop Enabled; 70% low, 100% high
Standard transmit queue 3
(intermediate priority)
Threshold 1 CoS 6 and 7
Tail-drop Disabled; 100%
WRED-drop Enabled; 70% low, 100% high
Thresholds 2–8 CoS None
Tail-drop Disabled; 100%
WRED-drop Enabled; 100% low, 100% high
Standard transmit queues 4–7
(intermediate priorities)
Thresholds 1–8 CoS None
Tail-drop Disabled; 100%
WRED-drop Enabled; 100% low, 100% high
Strict-priority transmit queue CoS 5
Tail-drop 100% (nonconfigurable)
Feature Default Value
Standard transmit queue 1
(lowest priority)
Threshold 1 CoS 0 and 1
Tail-drop Disabled; 100%
WRED-drop Enabled; 70% low, 100% high
Standard transmit queue 2
(medium priority)
Threshold 1 CoS 2, 3, and 4
Tail-drop Disabled; 100%
WRED-drop Enabled; 70% low, 100% high
Standard transmit queue 3
(high priority)
Threshold 1 CoS 6 and 7
Tail-drop Disabled; 100%
WRED-drop Enabled; 70% low, 100% high
Strict-priority transmit queue CoS 5
Tail-drop 100% (nonconfigurable)
Feature (continued) Default Value

Table of Contents

Related product manuals