EasyManua.ls Logo

Cisco 7604

Cisco 7604
1011 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47-14
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 47 Configuring Port Security
Displaying Port Security Settings
This example displays output from the show port-security command when you do not enter an interface:
Router# show port-security
Secure Port MaxSecureAddr CurrentAddr SecurityViolation Security
Action
(Count) (Count) (Count)
----------------------------------------------------------------------------
Fa5/1 11 11 0 Shutdown
Fa5/5 15 5 0 Restrict
Fa5/11 5 4 0 Protect
----------------------------------------------------------------------------
Total Addresses in System: 21
Max Addresses limit in System: 128
This example displays output from the show port-security command for a specified interface:
Router# show port-security interface fastethernet 5/1
Port Security: Enabled
Port status: SecureUp
Violation mode: Shutdown
Maximum MAC Addresses: 11
Total MAC Addresses: 11
Configured MAC Addresses: 3
Aging time: 20 mins
Aging type: Inactivity
SecureStatic address aging: Enabled
Security Violation count: 0
This example displays the output from the show port-security address privileged EXEC command:
Router# show port-security address
Secure Mac Address Table
-------------------------------------------------------------------
Vlan Mac Address Type Ports Remaining Age
(mins)
---- ----------- ---- ----- -------------
1 0001.0001.0001 SecureDynamic Fa5/1 15 (I)
1 0001.0001.0002 SecureDynamic Fa5/1 15 (I)
1 0001.0001.1111 SecureConfigured Fa5/1 16 (I)
1 0001.0001.1112 SecureConfigured Fa5/1 -
1 0001.0001.1113 SecureConfigured Fa5/1 -
1 0005.0005.0001 SecureConfigured Fa5/5 23
1 0005.0005.0002 SecureConfigured Fa5/5 23
1 0005.0005.0003 SecureConfigured Fa5/5 23
1 0011.0011.0001 SecureConfigured Fa5/11 25 (I)
1 0011.0011.0002 SecureConfigured Fa5/11 25 (I)
-------------------------------------------------------------------
Total Addresses in System: 10
Max Addresses limit in System: 128
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html

Table of Contents

Related product manuals