CHAPTER
50-1
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
50
Configuring NetFlow
This chapter describes how to configure NetFlow statistics collection on the Cisco 7600 series routers.
Note For complete syntax and usage information for the commands used in this chapter, refer to these
publications:
• The Cisco IOS NetFlow Command Reference at this URL:
http://www.cisco.com/en/US/docs/ios/netflow/command/reference/nf_book.html
• The Release 12.2 publications at this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/tsd_products_support_series_home.ht
ml
This chapter contains the following sections:
• Understanding NetFlow, page 50-1
• Default NetFlow Configuration, page 50-5
• NetFlow Configuration Guidelines and Restrictions, page 50-5
• Configuring NetFlow, page 50-6
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
Understanding NetFlow
These sections describe how NetFlow works:
• NetFlow Overview, page 50-2
• NetFlow on the MSFC, page 50-2
• NetFlow on the PFC, page 50-3
To Next Page
Loading...
Need help?
General
