6-9
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 6 Configuring the Supervisor Engine 2 and the Switch Fabric Module
Monitoring the Switch Fabric Module
This example shows how to display fabric errors on all modules:
Router# show fabric errors
slot channel module module module fabric
crc hbeat sync sync
1 0 0 0 0 0
3 0 0 0 0 0
3 1 0 0 0 0
4 0 0 0 0 0
4 1 0 0 0 0
6 0 0 0 0 0
6 1 0 0 0 0
7 0 0 0 0 0
7 1 0 0 0 0
Router#
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
To Next Page
Loading...
