Index
IN-12
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
IP to MPLS path 3
labels 2
Layer 2 VPN load balancing 8
MPLS to IP path 4
MPLS to MPLS path 4
nonaggregate lable 2
QoS default configuration 15
VPN 12
VPN guidelines and restrictions 11
mpls l2 transport route command 15
MPLS QoS
Classification 2
Class of Service 2
commands 16
configuring a class map 20
configuring a policy map 23
configuring egress EXP mutation 29
configuring EXP Value Maps 31
Differentiated Services Code Point 2
displaying a policy map 28
E-LSP 2
enabling QoS globally 18
EXP bits 2
features 3
IP Precedence 2
QoS Tags 2
queueing-only mode 19
MPLS QoS configuration
class map to classify MPLS packets 20
MPLS VPN
limitations and restrictions 11
MQC 1
not supported
CAR 3
queuing 3
supported
policy maps 3
MST 15
boundary ports 19
configuration 18
configuring 33
edge ports 20
enabling 34
hop count 20
instances 18
interoperability 16
interoperability with PVST+ 16
link type 20
master 20
message age 20
regions 18, 19
MSTP
boundary ports
configuration guidelines 16
described 6
CIST, described 3
CIST regional root 4
CIST root 5
configuration guidelines 16
configuring
forward-delay time 25
hello time 24
link type for rapid convergence 26
maximum aging time 26
maximum hop count 26
MST region 17
neighbor type 27
path cost 22
port priority 21
root switch 19
secondary root switch 20
switch priority 23
CST
defined 3
operations between regions 4
default configuration 16
displaying status 28
enabling the mode 17