Cisco 7800 Series Administration Guide

CHAPTER 8
Cisco IP Phone Security
• Security Features, on page 119
• Phones Supported in this Document, on page 123
• Cisco Product Security Overview, on page 123
Security Features
Security features ensure that calls are secure and authenticated.
Domain and Internet Setting
Configure Restricted Access Domains
If you enter domains, the Cisco IP Phone responds only to SIP messages only from the identified servers.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 80.
Procedure
Step 1 Select Voice > System.
Step 2 In the System Configuration section, in the Restricted Access Domains field, enter fully qualified domain
names (FQDNs) for each SIP server that you want the phone to respond to. Separate FQDNs with commas.
Example:
voiceip.com, voiceip1.com
Step 3 Click Submit All Changes.
Configure the Internet Connection Type
You can set the connection type to one of the following:
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
119

Cisco 7800 Series Specifications

General

Wireless	No
Video Support	No
PoE	Yes, 802.3af/at
Audio Codec Support	G.711, G.722, G.729, iLBC
Network Protocols	SIP, SDP, IPv4, IPv6, UDP, TCP, DNS, TFTP, HTTP, HTTPS, DHCP
Security Features	802.1X, TLS, SRTP
Power Options	PoE
Headset Port	3.5mm
Buttons	Line keys, navigation cluster, softkeys, mute, speakerphone, headset, volume control
Bluetooth	No
Ethernet Switch	Yes, 2-port 10/100/1000
USB Port	Yes, for headset (7875)