Use phone profile provisioning to restrict the ability to configure individual parameters. Take Connection_Type
parameter for example, when Phone-UI-User-Mode is set to Yes and, in the Resync file, the “ua” attribute
can be:
• Connection_Type ua=“rw”, you can read and change the information on the user phone web and phone
screen.
• Connection_Type ua=“ro”, you can only read, not change, the information on the user phone web and
phone screen.
• Connection_Type ua=“na”, you can not access the information on the user phone web or phone screen.
Note
For more information on provisioning, see the Cisco IP Phone 7800 Series Multiplatform Phones Provisioning
Guide.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 80.
Procedure
Step 1 Select Voice > System.
Step 2 Under System Configuration in the Phone-UI-User-Mode field, choose Yes.
Step 3 Click Submit All Changes.
Access Administrative Options by Login
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 80.
Procedure
If prompted, enter the Admin Password.
Access Administrative Options by IP Address
Procedure
Enter the IP address of the Cisco IP Phone in a web browser and include the admin/ extension.
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
83
Cisco IP Phone Installation
Access Administrative Options by Login
To Next Page
Loading...
Need help?
General
