Description and More InformationFeature
Updates the Cisco IP Phone with time zone changes.Time Zone Update
Allows users to redirect connected calls from their phones to another number.
Some JTAPI/TAPI applications are not compatible with the Join and Direct Transfer
feature implementation on the Cisco IP Phone and you may need to configure the Join
and Direct Transfer Policy to disable join and direct transfer on the same line or possibly
across lines.
Transfer
Enables callers to leave messages if calls are unanswered.Voice Message System
Web services are enabled by default.Web Access Enable by Default
Allows you to configure a phone to display recent call logs from either the BroadWorks
server or the local phone. After you enable the feature, the Recents screen has a Display
recents from menu and the user can choose the XSI call logs or the local call logs.
XSI call logs display
Feature Buttons and Softkeys
The following table provides information about features that are available on softkeys, features that are
available on dedicated feature buttons, and features that you need to configure as programmable feature
buttons. An “X” in the table indicates that the feature is supported for the corresponding button type or softkey.
Of the two button types and softkeys, only programmable feature buttons require configuration in Cisco IP
Phone administration.
The Cisco IP Phone 7811 does not have programmable feature buttons.
Note
Table 18: Features with Corresponding Buttons and Softkeys
SoftkeyProgrammable Feature
Button
Dedicated Feature ButtonFeature Name
XXAnswer
XXCall Forward All
XXCall Park
XCall Park Line Status
XXCall Pickup (Pick Up)
XCall Pickup Line Status
X (only displayed during
connected call conference
scenario)
XConference
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
156
Cisco IP Phone Administration
Feature Buttons and Softkeys
To Next Page
Loading...
Need help?
General
