Procedure
Step 1 On the Phone Web page, select Admin Login > Info > Status.
Step 2 In the Product Information section, you can view the customization state of the phone in the Customization
field.
If any provisioning is failing, you can view the details in the Provisioning Status section on the same page.
Cisco IP Phone Web Page
This section describes the information that you can obtain from the phone web page. You can use this
information to remotely monitor the operation of a phone and to assist with troubleshooting.
Related Topics
Access the Phone Web Page, on page 80
Determine the IP Address of the Phone, on page 81
Allow Web Access to the Cisco IP Phone, on page 81
Info
The fields on this tab are read-only and cannot be edited.
Status
System Information
DescriptionParameter
Displays the current host name assigned to the phone.Host Name
Displays the network domain name of the phone.
Default: cisco.com
Domain
Displays the primary NTP server assigned to the
phone.
Primary NTP Server
Displays the secondary NTP server assigned to the
phone.
Secondary NTP Server
IPv4 Information
DescriptionParameter
Indicates that the connection is established.IP Status
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
211
Cisco IP Phone Troubleshooting
Cisco IP Phone Web Page
To Next Page
Loading...
Need help?
General
