Cisco 7800 Series Administration Guide

DescriptionParameter
The Uniform Resource Identifier (URI) of the Busy
Lamp Field (BLF) list that you have set up for a user
of the phone, on the BroadSoft server.
This field is only applicable if the phone is registered
to a BroadSoft server. The BLF list is the list of users
whose lines the phone is allowed to monitor. See
Phone Configuration for Monitoring Other Phones,
on page 162 for details.
The BLF List URI must be specified in the format
<URI name>@<server>. The BLF List URI
specified must be the same as the value configured
for the List URI: sip parameter on the BroadSoft
server.
Default: Blank
Example XML configuration:
<BLF_List_URI
ua="na">MonitoredUsersList@sipurash22.com</BLF_List_URI>
BLF List URI
Controls whether the phone uses its line keys to
monitor the BLF list, when monitoring of the BLF
list is active.
This setting only has significance when BLF List is
set to Show.
Default: No
Example XML configuration:
<Use_Line_Keys_For_BLF_List
ua="na">Yes</Use_Line_Keys_For_BLF_List>
Use Line Keys For BLF List
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
300
Cisco IP Phone Troubleshooting
General

Cisco 7800 Series Specifications

General

Wireless	No
Video Support	No
PoE	Yes, 802.3af/at
Audio Codec Support	G.711, G.722, G.729, iLBC
Network Protocols	SIP, SDP, IPv4, IPv6, UDP, TCP, DNS, TFTP, HTTP, HTTPS, DHCP
Security Features	802.1X, TLS, SRTP
Power Options	PoE
Headset Port	3.5mm
Buttons	Line keys, navigation cluster, softkeys, mute, speakerphone, headset, volume control
Bluetooth	No
Ethernet Switch	Yes, 2-port 10/100/1000
USB Port	Yes, for headset (7875)