20 78-15630-02
Transferring a Connected Call
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
Tips
• You can only transfer a call on hold if you are using Direct Transfer. Otherwise, press Resume to
take a selected call off of hold, then transfer it.
• When transferring calls, all calls must be on the same line.
If you want to... Then...
Transfer a call without
talking to the transfer
recipient
During a connected call, press Transfer and enter the target number.
When you hear the call ringing, press Transfer again.
Talk to the transfer
recipient before transferring
a call (“consult transfer”)
During a connected call, press Transfer and enter the target number.
Wait for the transfer recipient to answer. If the recipient accepts the
transferred call, press Transfer again. If the recipient refuses the call,
press Resume to return to the original call.
Transfer two current calls
to each other (“direct
transfer”)
Scroll to highlight any call on the line and press Select. Repeat this
process for the second call. With one of the selected calls highlighted,
press DirTrfr. (You might need to press the more softkey first.) The two
calls connect to each other and drop you from the call.
If you want to stay on the line with the callers, use Join to create a
conference instead. For details, see the“Making Conference Calls”
section on page 21.
To Next Page
Loading...
