Customizing Phone Settings
Cisco IP Phone 7970 31
Customizing Phone Settings
You can personalize your Cisco IP Phone by adjusting settings, as described in the tables below. Keep
in mind a few tips when reviewing this information:
• Most settings are accessible on your phone, but a few are accessed online from your User Options
web pages. See the “Logging In to the User Options Web Pages” section on page 35 for more
information.
• If is not responsive, your system administrator might have disabled this button on your
phone. Ask your system administrator for more information.
Adjusting the Volume
The table below describes how to adjust and save volume levels on your phone.
If you want to... Then...
Adjust the volume
level for a call
Press during a call or after invoking a dial tone.
Doing so adjusts the volume level for the currently active audio mode. For
example, if you increase the volume while you are using the handset, you
have not affected the speakerphone volume.
Press Save to preserve the new volume as the default level for this audio
mode. If you adjust the handset, headset, or speakerphone volume without
saving the change, the volume will revert to the previously-saved level the
next time you use that audio mode.
Adjust the volume
level for the ringer
Press while the handset is in the cradle and the headset and
speakerphone buttons are off. The new ringer volume is saved automatically.
To Next Page
Loading...
