1-21
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12642-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
Installing Cisco Unified IP Phones
After you have added the phones to the Cisco Unified Communications Manager database, you can
complete the phone installation. You (or the phone users) can install the phone at the users’s location.
The Cisco
Unified IP Phone Installation Guide that ships in the box with each phone provides directions
for connecting the phone handset, cables, and other accessories.
7. Configure Cisco Unified IP Phone
services and assign services (optional).
Provides IP Phone
services.
Note Users can add or
change services
on their phones by
using the Cisco
Unified
IP Phone
User Options.
Refer to Cisco Unified
Communications Manager
Administration Guide, “Cisco
Unified
IP Phone Services
Configuration” chapter.
See the “Setting Up Services”
section on page 5-20.
8. Assign services to phone buttons
(optional).
Provides single button
access to an IP phone
service or URL.
Refer to Cisco Unified
Communications Manager
Administration Guide, “Cisco
Unified
IP Phone
Configuration” chapter, “Adding
a Cisco Unified
IP Phone
Service to a Phone Button”
section.
9. Add user information by configuring
required fields:
• Name (last)
• User ID
• Password (for User Options web
pages)
• PIN (for use with Extension
Mobility and Personal Directory)
Adds user information to
the global directory for
Cisco
Unified
Communications
Manager.
Refer to Cisco Unified
Communications Manager
Administration Guide, “End
User Configuration” chapter.
See the “Adding Users to Cisco
Unified Communications
Manager” section on page 5-20.
10. Associate a user with a phone
(optional).
Provides users with
control over their phone
such as forwarding calls
or adding speed-dial
numbers or services.
Note Some phones,
such as those in
conference rooms,
do not have an
associated user.
Refer to Cisco Unified
Communications Manager
Administration Guide, “End
User Configuration” chapter,
“Associating Devices to a User”
section.
Table 1-6 Checklist for Configuring the Cisco Unified IP Phone 7975G in Cisco Unified Communications Manager
Task Purpose For More Information
To Next Page
Loading...
