Cisco 7975G Administration Guide

4-17
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12642-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Call Preferences Menu
The Call Preferences menu displays settings that relate to the settings for the call preferences on a SIP
phone.
Table 4-7 describes the options in this menu.
Table 4-7 Call Preferences Menu Options
Option Description To Change
Caller ID Blocking Indicates whether caller ID blocking is
enabled (Yes) or disabled (No) for the
phone.
From Cisco Unified Communications
Manager Administration, choose
Device > Device
Settings > SIP
Profile.
Anonymous Call
Block
Indicates whether anonymous call
block is enabled (Yes) or disabled (No)
for the phone.
From Cisco Unified Communications
Manager Administration, choose
Device > Device
Settings > SIP
Profile.
Call Waiting
Preferences
Displays a sub-menu that indicates
whether call waiting is enabled (Yes) or
disabled (No) for each line.
From Cisco Unified Communications
Manager Administration, choose
Call
Routing > Directory Number.
Call Hold Ringback Indicates whether the call hold
ringback feature is enabled (Yes) or
disabled (No) for the phone.
From Cisco Unified Communications
Manager Administration, choose
Device > Device
Settings > SIP
Profile.
Stutter Msg
Waiting
Indicates whether stutter message
waiting is enabled (Yes) or disabled
(No) for the phone.
From Cisco Unified Communications
Manager Administration, choose
Device > Device
Settings > SIP
Profile.
Call Logs BLF
Enabled
Indicates whether BLF for call logs is
enabled (Yes) or disabled (No) for the
phone.
Use Cisco Unified Communications
Manager Administration.
Auto Answer
Preferences
Displays a sub-menu that indicates
whether auto answer is enabled (Yes)
or disabled (No) for the each line.
From Cisco Unified Communications
Manager Administration, choose Call
Routing > Directory Number.
Speed Dials Displays a sub-menu that displays the
lines available on the phone. Select a
line to see the speed dial label and
number assigned to that line.
From Cisco Unified Communications
Manager Administration, choose
Device > Add a New Speed Dial.
Related Topics
• Displaying a Configuration Menu, page 4-2
• Device Configuration Menu, page 4-12

Cisco 7975G Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Grey, Silver
Speakerphone	Yes
Voice codecs	G.711Mu, G.711a, G.722, G.729A, iLBC
Number of melodies	24
Aspect ratio	4:3
Display diagonal	5.6 \
Display resolution	320 x 240 pixels
Lines quantity	8 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Front camera	No
Security algorithms	128-bit AES
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	DHCP, TFTP
Volume control	Digital
Headphone outputs	1
Ethernet LAN (RJ-45) ports	2
Number of handles included	1 pc(s)
AC adapter output voltage	48 V
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Certification	FCC

Weight and Dimensions

Depth	152.4 mm
Width	266.7 mm
Height	203.2 mm
Weight	1600 g