EasyManuals Logo

Cisco 7975G Administration Guide

Cisco 7975G
217 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
4-25
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12642-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Power Save Configuration Menu
The Power Save Configuration menu displays the settings that control when the LCD screen on a phone
turns off to conserve power.
Table 4-13 describes the options on this menu.
For detailed information about configuring these settings, see the “Automatically Disabling the Cisco
Unified IP Phone Touchscreen” section on page 6-7.
Table 4-13 Power Save Configuration Menu Options
Option Description To Change
Display On Time Time each day that the LCD screen
turns on automatically (except on the
days specified in the Days Display Not
Active field).
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Display On
Duration
Length of time that the LCD screen
remains on after turning on at the time
shown in the Display On Time option.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Display Idle
Timeout
Length of time that the phone is idle
before the display turns off. Applies
only when the display was off as
scheduled and was turned on by an
end-user (by pressing a button on the
phone, touching the touchscreen, or
lifting the handset).
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Days Display Not
Active
Days that the display does not turn on
automatically at the time specified in
the Display On Time option.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Display On If
Incoming Call
Indicates whether the LCD screen
automatically illuminates when a call is
received.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.

Table of Contents

Other manuals for Cisco 7975G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7975G and is the answer not in the manual?

Cisco 7975G Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorGrey, Silver
SpeakerphoneYes
Voice codecsG.711Mu, G.711a, G.722, G.729A, iLBC
Number of melodies24
Aspect ratio4:3
Display diagonal5.6 \
Display resolution320 x 240 pixels
Lines quantity8 lines
Phonebook capacity- entries
Number of VoIP accounts-
Front cameraNo
Security algorithms128-bit AES
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsDHCP, TFTP
Volume controlDigital
Headphone outputs1
Ethernet LAN (RJ-45) ports2
Number of handles included1 pc(s)
AC adapter output voltage48 V
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
CertificationFCC
Weight and Dimensions IconWeight and Dimensions
Depth152.4 mm
Width266.7 mm
Height203.2 mm
Weight1600 g

Related product manuals