5-3
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12642-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Message Waiting Defines directory numbers for message-waiting
on and message-waiting off indicator. A
directly connected voice-messaging system
uses the specified directory number to set or to
clear a message-waiting indication for a
particular Cisco Unified IP Phone.
For more information, refer to:
• Cisco Unified
Communications Manager
Administration Guide,
“Message Waiting
Configuration” chapter.
• Cisco Unified
Communications Manager
System Guide, “Voice
Mail Connectivity to
Cisco Unified
Communications
Manager” chapter.
Audible Message
Waiting Indicator
(AMWI)
A stutter tone from the handset, headset, or
speakerphone indicates that a user has one or
more new voice messages on a line.
Note The stutter tone is line-specific. You
hear it only when using the line with the
waiting messages.
For more information, refer to
Cisco Unified
Communications Manager
System Guide, “Cisco Unified
IP Phones” chapter.
Auto Answer Connects incoming calls automatically after a
ring or two.
Auto Answer works with either the
speakerphone or the headset.
For more information, refer to
Cisco Unified
Communications Manager
Administration Guide,
“Directory Number
Configuration” chapter.
Auto-pickup Allows a user to use one-touch, pickup
functionality for call pickup, group call pickup,
and other group call pickup.
For more information, refer to
the Cisco Unified
Communications Manager
Features and Services Guide,
“Call Pickup Group” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference
To Next Page
Loading...
