Cisco 7975G Administration Guide

6-6
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12642-01
Chapter 6 Customizing the Cisco Unified IP Phone
Configuring Wideband Codec
Step 4 Use a text editor to edit the List.xml file. See the “List.xml File Format Requirements” section on
page 6-4 for the location of this file, formatting requirements, and a sample file.
Step 5 Save your modifications and close the List.xml file.
Note When you upgrade Cisco Unified Communications Manager, a default List.xml file will replace
your customized List.xml file. After your customize the List.xml file, make a copy of the file
and store it in another location. After upgrading Cisco
Unified Communications Manager,
replace the default List.xml file with your stored copy.
Step 6 To cache the new List.xml file, stop and start the TFTP service by using Cisco Unified Communications
Manager Serviceability or disable and re-enable the Enable Caching of Constant and Bin Files at Startup
TFTP service parameter (located in the Advanced Service Parameters).
Configuring Wideband Codec
If Cisco Unified Communications Manager has been configured to use G.722 (G.722 is enabled by
default for the Cisco Unified IP Phone 7975G) and if the far endpoint supports G.722, the call connects
using the G.722 codec in place of G.711. This situation occurs regardless of whether the user has enabled
a wideband headset or wideband handset, but if either the headset or handset is enabled, the user may
notice greater audio sensitivity during the call. Greater sensitivity means improved audio clarity but also
means that more background noise can be heard by the far endpoint—noise such as rustling papers or
nearby conversations. Even without a wideband headset or handset, some users may prefer the additional
sensitivity of G.722. Other users may be distracted by the additional sensitivity of G.722.
The following parameters in Cisco Unified Communications Manager Administration affect whether
wideband is supported for this Cisco Unified Communications Manager server or a specific phone:
• Advertise G.722 Codec—From Cisco Unified Communications Manager Administration, choose
System > Enterprise Parameters. The default value of this enterprise parameter is True, which
means that all Cisco Unified IP Phone Series that are registered to this Cisco Unified
Communications Manager advertise G.722 to Cisco Unified Communications Manager. If each
endpoint in the attempted call supports G.722 in its capabilities set, Cisco Unified Communications
Manager chooses that codec for the call.
• Advertise G.722 Codec—From Cisco Unified Communications Manager Administration, choose
Device > Phone. The default value for this product-specific parameter is the value that is specified
in the enterprise parameter. If you want to override this on a per-phone basis, choose Enabled or
Disabled in the Advertise G.722 Codec parameter on the Product Specific Configuration area of the
Phone Configuration window.
Configuring the Idle Display
You can specify an idle display that appears on the phone LCD screen. The idle display is an XML
service that the phone invokes when the phone has been idle (not in use) for a designated period and no
feature menu is open.
XML services that can be used as idle displays include company logos, product pictures, and stock
quotes.

Cisco 7975G Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Grey, Silver
Speakerphone	Yes
Voice codecs	G.711Mu, G.711a, G.722, G.729A, iLBC
Number of melodies	24
Aspect ratio	4:3
Display diagonal	5.6 \
Display resolution	320 x 240 pixels
Lines quantity	8 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Front camera	No
Security algorithms	128-bit AES
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	DHCP, TFTP
Volume control	Digital
Headphone outputs	1
Ethernet LAN (RJ-45) ports	2
Number of handles included	1 pc(s)
AC adapter output voltage	48 V
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Certification	FCC

Weight and Dimensions

Depth	152.4 mm
Width	266.7 mm
Height	203.2 mm
Weight	1600 g