Cisco 860 Series User Manual

A-3
Cisco Integrated Services Router Hardware Installation Guide
Appendix A Technical Specifications
Cisco 810 Series
Radio Immunity EN301 489-1, EN 301 489-7, and EN301 489-24
Transportation/Storage Conditions
Temperature –40 to158 °F (–40 to 70°C)
Humidity 5–95%
Altitude 4570 m (15,000 ft)
AC Power Adapter
Power Source 100–240 VAC
In-ceiling Plenum No
IP41 No
Extended Shock-vibe No
Maximum Power Consumption 25 W
Maximum Output Power Rating 20 W
Operating Temperature –13 to 140 °F (–25 to 60 °C)
PoE+ Splitter
Power Source PoE+ (IEEE802.3at Class 4)
In-ceiling Plenum Yes
IP41 No
Extended Shock-vibe No
Maximum Power Consumption 25 W
Maximum Output Power Rating 20 W
Operating Temperature –13 to 140 °F (–25 to 60 °C)
Embedded WiFi Antenna
Frequency Range — 2.4–2.5 Ghz
4.9–5.875 Ghz
Peak Gain — 4 dBi (2.4 GHz)
6 dBi (5.875 Ghz)
Voltage Standing Wave Ratio — 2.5:1 maximum for all bands
Nominal Impedance — 50 ohms
1. Routers shipped in People’s Republic of China.
Table A-1 Cisco 812 ISR Specifications (continued)
Description
C812G+7-K9
(3G only)
C812G-CIFI+7-E-K9
C812G-CIFI+7-N-K9
C812G-CIFI-V-A-K9
C812G-CIFI-S-A-K9
(3G + WiFi)

Cisco 860 Series Specifications

General

VPN Support	Yes
Firewall	Yes
QoS	Yes
Data Link Protocol	Ethernet, Fast Ethernet
Remote Management Protocol	SNMP, Telnet, HTTP, HTTPS
Operating System	Cisco IOS
Device Type	Router
WAN Interfaces	1 x 10/100Base-TX - RJ-45
LAN Interfaces	4 x 10/100Base-TX - RJ-45
Connectivity Technology	Wired
Network / Transport Protocol	IPSec, TCP/IP
Features	DHCP support, NAT support, VLAN support, IPv6 support
Compliant Standards	IEEE 802.3, IEEE 802.3u