Cisco 860 Series User Manual

A-9
Cisco Integrated Services Router Hardware Installation Guide
Appendix A Technical Specifications
Cisco 810 Series
Supported Power Adapters
Table A-5 and Table A-6 list the supported power adapters for Cisco 819 ISRs. The PWR1 AC and DC
adapters uses molex connector while PWR2 uses barrel-type connector.
C819HGW-S-A-K9
C819HGW-V-A-K9
220,000
C819HGW+7-E-K9
C819HGW+7-N-K9
C819HGW+7-A-A-K9
293,000
C819HWD-E-K9
C819HWD-A-K9
630,000
C819H-K9 1,000,000
Cisco 819HG-4G and Cisco 819G-4G ISRs
C819HG-4G-V-K9
C819G-4G-V-K9
214,000
C819HG-4G-A-K9
C819G-4G-A-K9
226,000
C819HG-4G-G-K9
C819G-4G-G-K9
293,000
Table A-4 MTBF Values (continued)
SKUs MTBF (hours)
Table A-5 Cisco 819G ISR Power Adapters
Power Adapter
Nominal Input
Range
C819G-4G-A-K9
C819G-4G-V-K9
C819G-4G-G-K9
(4G LTE SKUs)
C819G+7-K9
C819G-B-K9
C819G-S-K9
C819G-U-K9
C819G-V-K9
(3GSKUs)
PWR1-20W-AC 100–240 VAC — Yes
PWR2-20W-AC 100–240 VAC Yes —
PWR1-20W-12VDC 12 VDC — Yes
PWR2-20W-12VDC 12 VDC Yes —
PWR1-20W-24VDC 24 VDC — Yes
PWR2-20W-24VDC 24 VDC Yes —
Martek MBRH 0500-B/Q21 24 VDC — Yes
Martek MBRH 0500-C/Q21 52 VDC — Yes
Martek MBRH 0500-D/Q21 72 VDC — Yes

Cisco 860 Series Specifications

General

VPN Support	Yes
Firewall	Yes
QoS	Yes
Data Link Protocol	Ethernet, Fast Ethernet
Remote Management Protocol	SNMP, Telnet, HTTP, HTTPS
Operating System	Cisco IOS
Device Type	Router
WAN Interfaces	1 x 10/100Base-TX - RJ-45
LAN Interfaces	4 x 10/100Base-TX - RJ-45
Connectivity Technology	Wired
Network / Transport Protocol	IPSec, TCP/IP
Features	DHCP support, NAT support, VLAN support, IPv6 support
Compliant Standards	IEEE 802.3, IEEE 802.3u