Cisco 8945 User Manual

A list of phone accessories displays.
Step 3
Press Exit to return to the Applications screen.
View Accessory Details
Procedure
Step 1
Press Applications .
Step 2
Use the Navigation pad and Select button to scroll and select Accessories.
A list of phone accessories displays.
Step 3
Select an accessory from the list and press Details.
The phone screen displays the details of the selected accessory. The information displayed on the phone screen
depends on the selected accessory. Most of the accessories provide these details:
•
Device Name
•
Device Type
•
Configured
Step 4
Press Exit to return to a list of phone accessories.
Set Up Wideband for Analog Headset
Procedure
Step 1
Press Applications .
Step 2
Use the Navigation pad and Select button to scroll and select Accessories.
A list of phone accessories displays.
Step 3
Select Analog Headset and press Setup.
The phone screen displays the wideband status for the analog headset.
Step 4
To enable wideband for the analog headset, press Turn On.
Step 5
To disable wideband for the analog headset, press Turn Off.
Step 6
Press Return to return to the Accessories screen.
Add Bluetooth Accessory
This procedure applies to the Cisco Unified IP Phone 8945 only.
Cisco Unified IP Phones 8941 and 8945 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and
SIP)
24
Phone Applications
View Accessory Details

Cisco 8945 Specifications

General

Brand	Cisco
Model	8945
Category	IP Phone
Language	English