Cisco 8945 - Place Call with Speed-Dial Button; Use Speed-Dial Code Off-Hook; Use Speed-Dial Code On-Hook; Transfer

Related Topics
Speed Dial Setup in User Options, on page 81
Line Status Indicators
Speed Dial Pause, on page 81
Place Call with Speed-Dial Button
Before You Begin
Before you can use speed-dial buttons on your phone, you must set up Speed Dial on your User Options web
page.
Procedure
To place a call, press a speed-dial button on the left side of your phone.
Use Speed-Dial Code On-Hook
Before You Begin
Before you can use speed-dial codes on your phone, you must set up the codes on your User Options web
page.
Procedure
Enter the speed-dial code and press Speed Dial.
Use Speed-Dial Code Off-Hook
Before You Begin
Before you can use speed-dial codes on your phone, you must set up the codes on your User Options web
page.
Procedure
Step 1
Lift the handset and press Speed Dial.
Step 2
Enter the speed-dial code and press Speed Dial again to complete the call.
Transfer
Transfer allows you to redirect a connected call from your phone to another number:
Cisco Unified IP Phones 8941 and 8945 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
71
Calling Features
Place Call with Speed-Dial Button