Cisco 8945 User Manual

Procedure
Step 1
Press Applications .
Step 2
Use the Navigation pad and Select button to scroll and select Accessories.
Step 3
Select the Bluetooth accessory and press Connect.
When the connection is completed, the Bluetooth active icon displays on the phone screen header and a
check mark displays next to the connected accessory.
Disconnect Bluetooth accessory
This procedure applies to the Cisco Unified IP Phone 8945 only.
Procedure
Step 1
Press Applications .
Step 2
Use the Navigation pad and Select button to scroll and select Accessories.
Step 3
Select a Bluetooth accessory and then press the Disconnect.
Administrator Settings
For information on accessing and changing the Administrator Settings, contact your system administrator.
Phone Information
The Phone Information window displays the following information about your phone:
•
Model Number
•
IP Address (some phones display IPv4 Address and IPv6 Address)
•
MAC Address
•
Active Load
•
Last Upgrade
•
Active Server
•
Stand-by Server
Cisco Unified IP Phones 8941 and 8945 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and
SIP)
26
Phone Applications
Disconnect Bluetooth accessory

Cisco 8945 Specifications

General

Brand	Cisco
Model	8945
Category	IP Phone
Language	English