Cisco 8945 - Answer Call Using Pickup; Answer Call Using Group Pickup and Group Pickup Number; Answer Call Using Group Pickup and Phone Number

You can also monitor and pick up ringing calls using Line Status indicators if your system administrator has
set up Line Status indicators on speed-dial buttons for you. Line Status indicators allow you to see if a line
that is associated with a speed-dial button is idle, in-use, in a Do Not Disturb state, or ringing.
Related Topics
Line Status Indicators, on page 59
Answer Call Using PickUp
Procedure
Step 1
Perform one of the following actions:
•
Press PickUp to transfer a ringing call within your pickup group to your phone.
•
If you have multiple lines and want to pick up the call on a nonprimary line, first press the desired line
button, then press PickUp.
If your phone supports autopickup, you are connected to the call.
Step 2
If the call rings, press Answer to connect to the call.
Answer Call Using Group PickUp and Group PickUp Number
Procedure
Step 1
Perform one of the following actions:
•
Press Group PickUp to answer a call on a phone outside your pickup group.
•
If you have multiple lines and want to pick up the call on another line, first press the desired line button,
then press Group PickUp.
Step 2
Enter the group pickup number.
If your phone supports autopickup, you are now connected to the call.
Step 3
If the call rings, press Answer to connect to the call.
Answer Call Using Group PickUp and Phone Number
Procedure
Step 1
Perform one of the following actions:
Cisco Unified IP Phones 8941 and 8945 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
49
Calling Features
Answer Call Using PickUp