Client Matter Code
Your system administrator can set up your phone to request that you enter a Client Matter Code (CMC) after
you dial a phone number. The CMC can be used for accounting or billing codes, and your system administrator
assigns CMCs..
When required, the phone displays Enter Client Matter Code, the dialed number changes to
“********”, and you hear a special tone. Enter the CMC for the call using the keypad.
Related Topics
Forced Authorization Code, on page 55
Conference
Conference allows you to talk simultaneously with multiple parties in an ad hoc meeting.
When you are talking on a call, use Conference to dial another party and add them to the call.
If you have multiple phone lines, you can alternately use Conference to combine two calls across two lines.
For example, if you have a call on Line 1 and a call on Line 2, you can combine the calls into a conference.
As the conference host, you can remove individual participants from the conference. The conference ends
when all participants hang up.
Related Topics
Barge, on page 44
Meet Me Conference, on page 60
Add Party to Call to Create Conference
Procedure
Step 1
Start with a connected call that is not on hold.
Step 2
Press Conference and do one of the following:
•
Enter the phone number for the party you want to add and press Call.
•
Press a speed-dial button.
•
Press Speed Dial, enter a speed-dial number and press Speed Dial again.
•
Press Active Calls and select a call.
•
Select a call from the Call History.
Step 3
Wait for the party to answer (or skip to step 4 while the call is ringing).
Step 4
Press Conference.
Cisco Unified IP Phones 8941 and 8945 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
51
Calling Features
Client Matter Code
To Next Page
Loading...
Need help?
General
