CHAPTER
2-1
Catalyst 2970 Switch Hardware Installation Guide
OL-6422-01
2
Switch Installation
This chapter describes how to start your switch and how to interpret the power-on
self-test (POST) that ensures proper operation. It also describes how to install the
switch and how to make connections to the switch. Read the topics and perform
the procedures in this order:
• Preparing for Installation, page 2-1
• Verifying Switch Operation, page 2-8
• Installing the Switch, page 2-9
• Installing and Removing SFP Modules, page 2-23
• Connecting to the 10/100/1000 Ports, page 2-27
• Connecting to SFP Modules, page 2-30
• Where to Go Next, page 2-34
Preparing for Installation
This section covers these topics:
• Warnings, page 2-2
• Installation Guidelines, page 2-5
• Verifying Package Contents, page 2-7
• Verifying Switch Operation, page 2-8
To Next Page
Loading...
