Chapter 2 Switch Installation
Preparing for Installation
2-4
Catalyst 2970 Switch Hardware Installation Guide
OL-6422-01
Warning
To comply with safety regulations, mount switches on a wall with the front
panel facing up.
Statement 266
Warning
This unit is intended for installation in restricted access areas. A restricted
access area can be accessed only through the use of a special tool, lock and
key, or other means of security.
Statement 1017
Warning
Ethernet cables must be shielded when used in a central office environment.
Statement 171
Warning
Avoid direct exposure to the laser beam.
Statement 1012
Warning
Invisible laser radiation may be emitted from disconnected fibers or
connectors. Do not stare into beams or view directly with optical instruments.
Statement 1051
Warning
Class 1 laser product.
Statement 1008
To Next Page