2-11
Catalyst 2970 Switch Hardware Installation Guide
OL-6422-01
Chapter 2 Switch Installation
Installing the Switch
Figure 2-2 Removing Screws from the Catalyst 2970G-24TS Switch
Attaching Brackets to the Catalyst 2970 Switch
The bracket orientation and the brackets that you use depend on whether you are
attaching the brackets for a 19-inch or a 24-inch rack. For 19-inch racks, use
bracket part number 700-8209-01; for 24-inch racks, use bracket part number
700-13248-01. Figure 2-3 through Figure 2-14 show how to attach each type of
bracket to one side of the switch. Follow the same steps to attach the second
bracket to the opposite side.
24
97402
Catalyst 2970
SER
IE
S
23
2
4
25
26
27
28
To Next Page
Loading...
