Contents
xxv
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-09
Configuring Broadcast Packet Handling 31-13
Enabling Directed Broadcast-to-Physical Broadcast Translation 31-13
Forwarding UDP Broadcast Packets and Protocols 31-14
Establishing an IP Broadcast Address 31-15
Flooding IP Broadcasts 31-16
Monitoring and Maintaining IP Addressing 31-17
Enabling IP Unicast Routing 31-18
Configuring RIP 31-19
Default RIP Configuration 31-19
Configuring Basic RIP Parameters 31-20
Configuring RIP Authentication 31-22
Configuring Summary Addresses and Split Horizon 31-22
Configuring IGRP 31-24
Default IGRP Configuration 31-25
Understanding Load Balancing and Traffic Distribution Control 31-25
Configuring Basic IGRP Parameters 31-26
Configuring Split Horizon 31-28
Configuring OSPF 31-29
Default OSPF Configuration 31-30
Configuring Basic OSPF Parameters 31-31
Configuring OSPF Interfaces 31-32
Configuring OSPF Area Parameters 31-33
Configuring Other OSPF Parameters 31-34
Changing LSA Group Pacing 31-36
Configuring a Loopback Interface 31-36
Monitoring OSPF 31-37
Configuring EIGRP 31-38
Default EIGRP Configuration 31-39
Configuring Basic EIGRP Parameters 31-40
Configuring EIGRP Interfaces 31-41
Configuring EIGRP Route Authentication 31-42
Monitoring and Maintaining EIGRP 31-43
Configuring BGP 31-44
Default BGP Configuration 31-46
Enabling BGP Routing 31-48
Managing Routing Policy Changes 31-50
Configuring BGP Decision Attributes 31-51
Configuring BGP Filtering with Route Maps 31-53
Configuring BGP Filtering by Neighbor 31-54
To Next Page
Loading...
