Cisco Catalyst 3550 Series - CHAPTER 26 Configuring System Message Logging; Configuring Named MAC Extended ACLs

Contents
xxvi
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-09
Configuring Prefix Lists for BGP Filtering 31-55
Configuring BGP Community Filtering 31-56
Configuring BGP Neighbors and Peer Groups 31-58
Configuring Aggregate Addresses 31-60
Configuring a Routing Domain Confederation 31-60
Configuring BGP Route Reflectors 31-61
Configuring Route Dampening 31-62
Monitoring and Maintaining BGP 31-63
Configuring Multi-VRF CE 31-65
Understanding Multi-VRF CE 31-65
Default Multi-VRF CE Configuration 31-67
Multi-VRF CE Configuration Guidelines 31-68
Configuring VRFs 31-69
Configuring a VPN Routing Session 31-70
Configuring BGP PE to CE Routing Sessions 31-70
Multi-VRF CE Configuration Example 31-71
Displaying Multi-VRF CE Status 31-75
Configuring Protocol-Independent Features 31-75
Configuring Cisco Express Forwarding 31-75
Configuring the Number of Equal-Cost Routing Paths 31-76
Configuring Static Unicast Routes 31-77
Specifying Default Routes and Networks 31-78
Using Route Maps to Redistribute Routing Information 31-79
Configuring Policy-Based Routing 31-82
PBR Configuration Guidelines 31-83
Enabling PBR 31-84
Filtering Routing Information 31-85
Setting Passive Interfaces 31-85
Controlling Advertising and Processing in Routing Updates 31-86
Filtering Sources of Routing Information 31-87
Managing Authentication Keys 31-88
Monitoring and Maintaining the IP Network 31-89
CHAPTER 32 Configuring HSRP 32-1
Understanding HSRP 32-1
Configuring HSRP 32-4
Default HSRP Configuration 32-4
HSRP Configuration Guidelines and Limitations 32-4
Enabling HSRP 32-5