Index
IN-9
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-09
CDP 22-2
DHCP 19-3
DNS 7-17
EIGRP 31-39
EtherChannel 30-8
fallback bridging 36-3
HSRP 32-4
IGMP 34-31
IGMP filtering 20-22
IGMP snooping 20-6
IGMP throttling 20-22
IGRP 31-25
initial switch information 4-3
IP addressing, IP routing 31-4
IP multicast routing 34-13
Layer 2 interfaces 10-12
Layer 2 protocol tunneling 15-10
MAC address table 7-22
MSDP 35-4
MSTP 17-12
multi-VRF CE 31-67
MVR 20-16
NTP 7-4
optional spanning-tree features 18-14
OSPF 31-30
password and privilege level 8-2
RADIUS 8-20
RIP 31-19
RMON 25-3
RSPAN 24-8
SNMP 27-6
SPAN 24-8
standard QoS 29-25
STP 16-11
system message logging 26-3
system name and prompt 7-15
TACACS+ 8-13
UDLD 23-4
VLAN, Layer 2 Ethernet interfaces 12-19
VLANs 12-7
VMPS 12-30
voice VLAN 14-2
VTP 13-6
WCCP 33-5
default gateway 4-10, 31-11
default networks 31-78
default routes 31-78
default routing 31-2
deleting VLANs 12-10
description command 10-17
designing your network, examples 1-9
destination addresses, in ACLs 28-12
detecting indirect link failures, STP 18-10
device discovery protocol 22-1
Device Manager 3-14
See also Switch Manager
DHCP-based autoconfiguration
client request message exchange
4-4
configuring
client side
4-3
DNS 4-6
relay device 4-6
server-side 4-5
TFTP server 4-6
example 4-8
lease options
for IP address information
4-5
for receiving the configuration file 4-5
overview 4-3
relationship to BOOTP 4-3
relay support 1-6
support for 1-2
DHCP option 82
configuration guidelines
19-3
default configuration 19-3
displaying 19-9
To Next Page
Loading...
