Cisco Catalyst C3850 Series User Manual

• PWR-C1-1100WAC: 12–6 A
• PWR-C1-715WAC: 10–5 A
• PWR-C1-350WAC: 4–2 A
• PWR-C3-750WAC-R: 11 A @ 100 VAC (max),
6 A @ 200 VAC (max)
• PWR-C3-750WAC-F: 11 A @ 100 VAC (max),
6 A @ 200 VAC (max)
Input current
• PWR-C1-1100WAC: –56 V@19.64 A
• PWR-C1-715WAC: –56 V@12.8 A
• PWR-C1-350WAC: –56 V@6.25 A
• PWR-C3-750WAC-R:12 VDC @ 62 A, 3.3 VDC
@ 3 A
• PWR-C3-750WAC-F:12 VDC @ 62 A, 3.3 VDC
@ 3 A
Output ratings
• PWR-C1-1100WAC: 4263 BTUs per hour, 1250
W
• PWR-C1-715WAC: 2742 BTUs per hour, 804
W
• PWR-C1-350WAC: 1357 BTUs per hour, 398
W
Total input BTU
15
• PWR-C1-1100WAC: 3751 BTUs per hour, 1100
W
• PWR-C1-715WAC: 2438 BTUs per hour, 715
W
• PWR-C1-350WAC: 1194 BTUs per hour, 350
W
• PWR-C3-750WAC-R: 1122 BTU/hour
(nominal), 1365 BTU/hour (max)
• PWR-C3-750WAC-F: 1122 BTU/hour
(nominal), 1365 BTU/hour (max)
Total output BTU
16
15
The total input and total output BTU ratings refer to input power to the power supply and output power
to the switch. The BTU ratings are based on 100 VAC for the 350-W and 715-W power supplies and
115 VAC for the 1100-W power supply.
16
The total input and total output BTU ratings refer to input power to the power supply and output power
to the switch. The BTU ratings are based on 100 VAC for the 350-W and 715-W power supplies and
115 VAC for the 1100-W power supply.
Table 36: Power Specifications for DC-Power
Power Requirements
• PWR-C1-440WDC: 440 W
• PWR-C3-750WDC-R: 750 W
• PWR-C3-750WDC-F: 750 W
Maximum output power
Catalyst 3850 Switch Hardware Installation Guide
OL-26779-05116
Technical Specifications
Technical Specifications

Cisco Catalyst C3850 Series Specifications

General

Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
RAM	4 GB
Flash Memory	4 GB
Series	Catalyst 3850
Power Supply Options	AC or DC
Software	Cisco IOS XE
Operating Temperature	32 to 113°F (0 to 45°C)
Ports	12, 24, or 48 x 10/100/1000 Ethernet ports
Uplink Interfaces	Optional 10G uplinks