Cisco Catalyst C9200-48T User Manual

Figure 35: Setting up DHCP Client Identifier on Windows
5. Restart the PC for the configuration to take effect.
Setting up the DHCP Client Identifier on the client for MAC
1. Go to System Preferences >Network >Advanced >TCP >DHCP Client ID: and enter webui.
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
54
Configuring the Switch
Connecting to the Switch

Cisco Catalyst C9200-48T Specifications

General

Total 10/100/1000 or Multigigabit copper ports	48 x 10/100/1000
Switching Capacity	176 Gbps
DRAM	4 GB
Flash	16 GB
PoE Support	No
MTBF	1, 000, 000 hours
Power Device	Internal power supply
Rack Mountable	Yes
Product Type	Layer 3 Switch
Uplink Ports	4 x 10 Gigabit Ethernet
Input Voltage	AC 120/230 V
Authentication Method	Secure Shell (SSH), RADIUS, TACACS+
Operating Temperature	0 to 45°C