Contents
4
Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide
OL-5332-01
Configuring Enhanced IGRP 14
Configuration Example 15
Verifying Your Configuration 15
PART
2 Configuring Your Router for Ethernet and DSL Access
CHAPTER
2 Sample Network Deployments 1
CHAPTER
3 Configuring PPP over Ethernet with NAT 1
Configure the Virtual Private Dialup Network Group Number 2
Configure the Fast Ethernet WAN Interfaces 3
Configure the Dialer Interface 4
Configure Network Address Translation 6
Configuration Example 8
Verifying Your Configuration 9
CHAPTER
4 Configuring PPP over ATM with NAT 1
Configure the Dialer Interface 3
Configure the ATM WAN Interface 5
Configure DSL Signaling Protocol 6
Configuring ADSL 6
Verify the Configuration 7
Configuring SHDSL 7
Verify the Configuration 8
Configure Network Address Translation 9
Configuration Example 11
Verifying Your Configuration 12
CHAPTER
5 Configuring a LAN with DHCP and VLANs 1
Configure DHCP 2
Configuration Example 4
Verify Your DHCP Configuration 4
Configure VLANs 5
Assign a Switch Port to a VLAN 6
Verify Your VLAN Configuration 6
CHAPTER
6 Configuring a VPN Using Easy VPN and an IPSec Tunnel 1
Configure the IKE Policy 4