EasyManua.ls Logo

Cisco CRS Series - Page 44

Cisco CRS Series
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
Inter-AS Option A, B and C supported. For Options B and C, Root has to be on a PE or the roor-address
reachability has to be leaked across all autonomous systems.
All PEs must have a unique BGP Route Distinguisher (RD) value. To configure BGP RD value, refer
Cisco IOS XR Routing Configuration Guide for the Cisco CRS Router .
Profile 14 : MP2MP-mLDP-P2MP with BGP C-multicast Routing
These are the characteristics of this profile:
Full mesh of P2MP mLDP core-tree as the Default-MDT, with BGP C-multicast Routing.
All UMH options supported.
Default and Data MDT supported.
Customer traffic can be SM, SSM , or Bidir (separate-partitioned-mdt).
RPL-Tail-end-Extranet supported.
Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
Inter-AS Option A, B and C supported.
All PEs must have a unique BGP Route Distinguisher (RD) value. To configure BGP RD value, refer
Cisco IOS XR Routing Configuration Guide for the Cisco CRS Router .
Profile 15 : MP2MP-mLDP-MP2MP with BGP C-multicast Routing
These are the characteristics of this profile:
Full mesh of MP2MP mLDP core-tree as the Default-MDT, with BGP C-multicast Routing.
All UMH options supported.
Default and Data MDT supported.
Customer traffic can be SM, SSM , or Bidir (separate-partitioned-mdt).
RPL-Tail-end-Extranet supported.
Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
Inter-AS Option A, B and C supported.
All PEs must have a unique BGP Route Distinguisher (RD) value. To configure BGP RD value, refer
Cisco IOS XR Routing Configuration Guide for the Cisco CRS Router .
Profile 16 : Rosen-Static-P2MP-TE with BGP C-multicast Routing
These are the characteristics of this profile:
Full mesh of Static-P2MP-TE core-trees, as the Default-MDT, with BGP C-multicast Routing.
All UMH options supported.
Support for Data MDT, Default MDT.
Customer traffic can be SM, SSM .
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
34
Implementing Multicast Routing on Cisco IOS XR Software
Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support

Table of Contents

Other manuals for Cisco CRS Series

Related product manuals