Cisco CRS Series - Page 85

SUMMARY STEPS
1.
configure
2.
interface type interface-path-id
3.
description line
4.
vrf vrf_name
5.
{ipv4 | ipv6 address} address mask
6.
router ospf 100
7.
nsf cisco
8.
redistribute bgp 100
9.
area area_id
10.
interface type interface-path-id
11.
router bgp 100
12.
bgp router-id ip_address
13.
bgp graceful-restart
14.
address-family {ipv4 | ipv6} unicast
15.
redistribute connected
16.
address-family {ipv4 | ipv6} multicast
17.
redistribute connected
18.
address-family {vpnv4 | vpnv6} unicast
19.
address-family {ipv4 | ipv6} mdt
20.
address-family {ipv4 | ipv6} mvpn
21.
neighbor address
22.
remote-as 2-byte AS number
23.
update-source interface type interface-path-id
24.
address-family {ipv4 | ipv6} unicast
25.
route-policy name in
26.
route-policy name out
27.
address-family {ipv4 | ipv6} multicast
28.
address-family {vpnv4 | vpnv6} unicast
29.
route-policy name in
30.
route-policy name out
31.
address-family {ipv4 | ipv6} mdt
32.
address-family {ipv4 | ipv6} mvpn
33.
vrf name
34.
rd x.y format
35.
address-family {ipv4 | ipv6} unicast
36.
redistribute connected
37.
address-family {ipv4 | ipv6} mvpn
38.
multicast-routing [address-family {ipv4 | ipv6}]
39.
interface type interface-path-id enable
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
75
Implementing Multicast Routing on Cisco IOS XR Software
Configuring MVPN GRE BIDIR