Chapter 4 Front Panel Operation
Setup Menu: Common Interface (CI)
To view the CI menus from the Main menu, press the RIGHT arrow key once and
then the SELECT key to reach the Setup menu. Then press the RIGHT arrow key
four times and the SELECT key to view the CI menu.
The Common Interface (CI) slots are located under the door on the front panel. They
allow use of a CAM (Conditional Access Module) Smart Card to decrypt purchased
programming.
You must be authorized to view the programming available via the Smart Card from
your service provider.
CAMs must be purchased from Cisco. For a list of the supported CAMs, see
Common Interface Modules (on page 41).
For instructions on how to select and store settings, see About the Front Panel (on
page 44). The CI menu has the following structure:
To Next Page
Loading...
