Chapter 5 Web GUI Setup and Monitoring
11 Click Apply.
12 Click Copy To MOIP to copy all the DPM data from the ASI output to the MPEG
over IP output.
Viewing the ASI Output Transport Status
From the user interface of the D9854/D9854-I, choose Transport Stream > Output
Transport Status under ASI Output. The PID Output Status page is displayed.
The Program Entry - Referenced PIDs table displays the specified PE ES PIDs
information on the output.
The Output Channel and PID Conflicts table displays a list of conflicts when the
DPM alarm is active.
To Next Page
Loading...
