Cisco D9854-I User Manual

Setting up Input Information
199
Viewing the Common Interface (CI) Status
From the user interface of the D9854/D9854-I, choose Input > CI Setup > CI Status.
The CI Status page is displayed.
The following table describes the CI Status:
CI Status
Description
CI Slot
Indicates whether it is the top slot (TOP) or the bottom slot
(BOTTOM).
CAM Status
Status of the CAM (Ready or Not Ready).
Sys Name
System name of the CAM.
Comp Name
Displays the company name of the CAM.
Manufacturer Code
The manufacturer’s code.
Manufacturer ID
The factory loaded application number of the CAM.
Serial Number
The unique serial number of the CAM.
Hardware Version
The hardware version number of the CAM.
Application Version
The software version number of the CAM.

Cisco D9854-I Specifications

General

Brand	Cisco
Model	D9854-I
Category	Receiver
Language	English