Chapter 4 Front Panel Operation
Selects whether to regenerate
the PSI tables in the output.
Always or As Needed
Always - All tables are regenerated.
As Needed - Only regenerate the
tables if the content has changed.
This copies all DPM data from
either the ASI output to the
MOIP output (MPEG over IP)
or from the MOIP output to the
ASI output depending on your
selection.
ASI/MOIP1
Select the Program Entry to
configure.
Displays the channel number to
which the PE is tuned. This is
read-only.
Indicates the input PID value of
the Program Map Table for the
current channel. This is read-
only.
To Next Page
Loading...
Need help?
General
