Cisco D9854-I User Manual

Chapter 4 Front Panel Operation
136
Menu Item
Description
Parameters
Use Inp
Chan/PMT/PIDs
Set to Yes to use the input
channel numbers, PMT PID
numbers, and/or ES PID
numbers. Otherwise, set to No
to use the Start channel and
channel Step assigned below.
Yes or No
Start
First PE channel to use if the
Use Inp Chan/PMT/PIDs is set
to No.
1 to 65535 for Use Inp Chan
1 to 8192 for Use Inp PMT/PIDs
Step
Offset of the subsequent PE
channel, PE PMT PID, or first
ES PID of subsequent channel
numbers.
1 to 65535 for Use Inp Chan
1 to 8192 for Use Inp PMT/PIDs
Use Inp Ord
Set to Yes to assign the ES PID
according to the incoming PMT
order. Otherwise, set to No to
use reserved PIDs defined
below.
Yes or No
PCR, VID, AUD,
SUBT, VBI, DPI,
MPE, TTX, Data,
LSD, CDT, ETV
Set the number of PIDs for the
specified streams in one
channel.
1 to 64

Cisco D9854-I Specifications

General

Brand	Cisco
Model	D9854-I
Category	Receiver
Language	English