Cisco D9854-I User Manual

Setting up Input Information
169
Parameter
Description
Signal Status
Indicates whether the input signal is locked.
 Locked - Indicates the receiver is locked to a carrier
with no valid content.
 Lock+Sig - Indicates the receiver is locked to a carrier
with valid content.
 No Lock - Indicates the receiver is not locked to a
carrier.
AFC (MHz)
Indicates the current Automatic Frequency Control count, in
MHz.
Acquisition State
Displays Full if the SI and PSI tables have all been found.
Otherwise, it will display Degraded if there are missing tables or
None if no SI or PSI tables have been found.
Orbital Validation Status
Displays the status of the last user orbital validation performed.
It displays Passed if the last orbital validation was successful or
None if an orbital validation was never performed. Otherwise, it
will display a reason for the failed validation.
Orbital Validation Date
Displays the last date and time that the user orbital validation
was performed, if applicable.

Cisco D9854-I Specifications

General

Brand	Cisco
Model	D9854-I
Category	Receiver
Language	English